汽轮机备件Made to Order

汽轮机消声器:排汽、放空及安全阀消声器

Indicative Price Range

₹40K–₹4L每套

碳钢至SS;依蒸汽流量、压力及dB(A)目标确定尺寸

Get Quote

Prices vary by specification, material grade, and order quantity. The range shown reflects our typical market spread — contact us for a firm quotation.

用于降低汽轮机装置向大气排放的高压蒸汽噪声的放空、排汽及安全阀消声器:背压式汽轮机排汽泄放口、启动及暖机放空口、汽轮机进汽及抽汽安全阀出口,以及调试期间的蒸汽吹扫。每台消声器均由我们根据客户要求设计并制造,采用多孔扩散级使蒸汽射流减速并扩散,再配合填充式吸声段。尺寸依据蒸汽流量、压力、温度以及参考距离处要求的dB(A)限值确定。可提供碳钢材质,或不锈钢材质并配合合金钢入口段用于过热蒸汽。

Primary Industrial Application

安装于糖厂和酒精厂、造纸与纸浆、钢铁、石化及发电行业的汽轮机和锅炉装置中安全阀、大气泄放阀及放空管线的出口:背压式汽轮机排汽泄放放空口、汽轮机启动及暖机放空口、汽轮机进汽及抽汽安全阀出口、PRDS减温减压站安全阀出口,以及凝汽式汽轮机的抽气器排汽口。也可作为现有放空口上锈蚀、噪声大或失效消声器的替换件,按原有设备的连接及安装尺寸设计制造;无图纸时可依据样品或照片进行逆向工程;另提供汽轮机安装及调试期间用于管道吹扫的临时蒸汽吹扫消声器。

Inlet Size Range200 NB至600 NB;其他规格按客户要求
Inlet Connection法兰(ASME B16.5 / DIN)或对焊
Est. Price₹40K – ₹4LIndicative estimate · contact for firm quote
Lead TimeStocked / 2–4 weeks

Price & Lead Time shown on every tab

Request Quote via WhatsApp

Scoped to this part for a fast reply. For general inquiries, use our Contact page instead.

PDF, DWG, DXF, JPG, PNG — max 10 MB per file. Helps us quote faster.

We respond within 1 business day · No spam · Privacy Policy

Need installation or maintenance?

Our field engineers supply, install, and commission everything we sell.

View engineering services

Technical details we need to quote

  • Equipment make and model, or the part number you currently use
  • A drawing or a clear photo of the part or its nameplate
  • Quantity required
  • Where it is fitted: safety valve outlet, turbine exhaust relief, start-up vent or steam blowing
  • Steam flow in kg/h (or the safety valve's rated capacity and set pressure)
  • Inlet steam pressure and temperature
  • Inlet line size and flange rating, and the outlet or stack arrangement
  • Noise limit required in dB(A) and the distance it applies at
  • Allowable back pressure, if specified

Send these on the contact form or by WhatsApp.

You May Also Need

汽轮机碳石墨汽封密封环

精密加工的碳石墨密封环,用于汽轮机汽封密封。自润滑材质可在极端温度下保持紧密间隙。孔径范围25–600毫米;兼容特里维尼(Triveni)、BHEL、西门子汽封密封系统。可提供剖分式设计,便于原位安装,无需拆卸转子。

Application: 适用于汽轮机轴端汽封的压力保持;燃气轮机迷宫式轴封。

₹5K – ₹35K每套Indicative price: contact for firm quote

汽轮机迷宫式轴封填料

为汽轮机轴封定制制造的迷宫式密封分段及填料。高温合金抗侵蚀齿形结构,按原厂紧密间隙规格加工。典型径向间隙0.2–0.6毫米(按原厂规格);弹回式(可伸缩)密封相较固定式设计可缩短停机时间。兼容特里维尼、BHEL、西门子、Belliss & Morcom及KKK汽轮机。

Application: 适用于汽轮机旋转部件与静止部件之间的轴封密封;防止蒸汽沿轴在多个压力级泄漏。

₹8K – ₹65K每套Indicative price: contact for firm quote

汽轮机巴氏合金径向轴承与推力瓦

适用于关键旋转汽轮机设备的精密加工巴氏合金(白合金)轴颈轴承及推力轴承。超声波结合检测可验证巴氏合金与瓦壳的粘接质量。

Application: 适用于汽轮机、压缩机及齿轮箱中高速转子的支撑;汽轮机推力轴承座内的推力负荷管理。

₹10K – ₹1.3L每件Indicative price: contact for firm quote

Need It Installed or Serviced?

Need Fitting or Commissioning Support?

Find Us Online

Find us on

Our business profiles on Google, IndiaMART, TradeIndia, ExportersIndia and JustDial.

Call NowWhatsApp